Titan 7 T-S5 Forged wheel

Titan 7 wheels are fully forged with an industry leading 10,000 Tons of pressure. They are available in Satin Titanium and Machine Black
  • Big Brake Clearance
  • Reinforced Inner Rim Flange
  • Optimised Weight Reduction
  • Rigid Spoke Tracer
  • Gear Cut Knurled Bead Seat
Evo specific 20″ fitment [stagered]
  • 20×10 ET 20 (coming soon)
  • 20×12 ET20 (coming soon)

MCS 3-Way Remote Reservoir Dampers (3W)

Swift 60mm springs & helpers

NISSAN GT-R R35 TRACK KIT

Front

This kit brings the Roll Centre, anti-squat, bump steer and camber curve into good range, providing better roll stiffness, better handling and grip on lowered car.

  • Dual kinematics setup. Uprights have points for lowered ride height with standard 710mm (28“) diameter wheels and second set of points for either small wheels with lowered ride height that are required at some series or for standard wheel with standard ride height.
  • Adjustable motion ratio by changing shock position on arm changing spring rate.
  • Understeer/oversteer can be changed in a few minutes
  • Cro-Moly rod ends and sphericals used instead of rubber bushings
  • Slightly Quicker steering ratio.
  • Easy camber, caster adjustments
  • 7075-T6 aluminium billet CNC knuckles
  • The standard 20“ or 18“ racing wheel can be used.
  • Uprights have room for bigger CV joint if needed.
  • This kit assumes coilovers
  • Original wheel speed sensor can be used

Rear

This kit brings the Roll Centre, bump steer and camber curve back to normal range, providing better roll stiffness, better handling and grip.

  • Dual kinematics setup. Uprights have points for lowered ride height with standard 710mm (28“) diameter wheels and second set of points for either small wheels with lowered ride height that are required at some series or for standard wheel with standard ride height.
  • 7075-T6 aluminium billet CNC knuckles
  • Cro-Moly rod ends and sphericals used instead of rubber bushings
  • Easy camber adjustments
  • The standard 20“ or 18“ racing wheel can be used.
  • Uprights have room for bigger CV joint if needed.
  • This kit assumes coilovers
  • Original wheel speed sensor can be used

AT Power DBW

iLIFT System for factory shock absorbers

The iLIFT Suspension Lift System can be activated with a switch to raise and lower the vehicle with either a factory switch or the included rocker switch. Designed to work with the factory shock absorbers the kit allows factory ride height lowering up to 1.25 with the included coil over height adjustable mount & spring kit.

Kit includes

  • Adjustable lightweight threaded body sleeves and perches
  • Swift springs – factory spring rate
  • Suspension Actuators
  • Electronic Control Unit (ECU) w/ Wireless Configuration
  • Manifold Control Unit
  • Power Distribution Module (PDM)
  • Wire Harness
  • Air Tank with Integrated Mounting Bracket or separate Brackets for Individual Components
  • High Quality Nickel Plated Fittings, Air Tube, & Air Tube Cutting Tool
  • Suspension Actuator Installation Tool

iLIFT Suspension Lift System is also available with MCS  aftermarket coil over shock absorbers.

Related products

iLIFT System Control w/ Cruise Switch

Hidden Air Compressor

Compact Trunk-Mounted Air Tanks